Watering Timer Solar Power Automatic Irrigation Watering Timer Programmable LCD Display Hose Timers Irrigation System
Do you need to go on vacation and have no one to leave your plants to water them? This high quality automatic timer is the solution to your problem. The automatic irrigation works without electricity because it has solar power, which greatly contributes to the autonomy of the system. The system is ideal for any kind of use, It's a great solution for Flowerpots and outdoor garden.
The system can always be upgraded for more than 30 plants if needed.
High quality plastic material, durable and lightweight. Automatic and intelligent design, easy to operate
Sealing clear cover can protect the LCD screen from rainwater. Suitable for the control of all systems, such as lawn sprinkler, drip hous...
1. Solar LCD Timer Automatic Rechargeable Automatic Irrigation
2. 4 universal adapters for different types of connectors
A good irrigation helper for watering plants at the balcony, home and garden. Never worry about the plant when you are away. No need to connect the alternating current power supply. An LCD display can contorl the watering situation and the standard time. Can be setted to lot of different procedures. It has a memory function, the controller will work normally after change the battery.
Irrigation Frequency: 1-16 times a day/ 30days a month
Irrigation Time: 1min (min), 9 hour 59 min (max)
Water Pressure: 0-400kpa
Water Temperature: 0-40 C
Battery: 1.5V rechargeble battery(not included), solar power
Battery Service Life: About 2 years
Function: LCD display, time, irrigation situation, memory
1. Put the solar panel under the sun to test whether it is working.
2. Change the battery when it is near the service life, in order to avoid the water splashing in all directions.
3. Different plants should use different procedures to irrigate.
4. Because water has impurity, you should wash the stainless strainer in time in case of blocking.
5. If the display shows the situation which battery has low power, you should turn off the faucet , change the new battery and set the watering procedure again. If you don't change the battery, you should turn off the valve.
Step 1: Put the solar panel toward the sun for some time then watch the screen whether appear numbers, if the timer can work.
Open the cover, put two 1.5V exchanged batteries in it.
Step 2: Set Time
Press "TIME", the hour starts flashing, press to change the hour number, then press "SET" to confirm, later the minute starts flashing, press to change the minute number and press "SET" to confirm.
Step 3: Set program
Press "PROG", the screen shows prog, start time, running time and days. The number starts to flash. This number means the 1st pro or 2nd pro or 3rd pro etc. You can set 16 different kinds of programs. Press chooses the number and then press "SET" to confirm.
Then set the start time, running time and days as the same method. The day 1 means everyday to water, 2 means watering once in two days, etc.
The start time means when you wants to watering.
The running time means how long will water. (Time Range: 1-9 hour 59 min,such as, you need to watering for 5 min, set at 0:05.
When you finish with the time, press"SET" to confirm, automaticlly jump to the days setting)
The day's means how often repeat the program.
Step 4: Check
Please check your settings. Press "PROG", then press to check your set one by one. If you needi to modify a program , press "SET" and to modify like the third step.
Step 5: Temporary irrigation
Press "ON", the running time (0:02) starts to flash. Then press (change the number) and "SET" (confirm the number) to set hours and minutes you need.
After you change the minute's you need, press "SET" to start to watering until the end.
If you wants to stop watering, please press "OFF".